Sistem Monitoring dan Kontrol Motor AC 3 Phasa Melalui Inverter dengan Protokol Modbus Menggunakan Visual Basic Berbasis Atmega 2560

Emillia Kartika(1), Ta'ali Ta'ali(2), Hastuti Hastuti(3),
(1) Universitas Negeri Padang  Indonesia
(2) Universitas Negeri Padang  Indonesia
(3) Universitas Negeri Padang  Indonesia

Corresponding Author


DOI : https://doi.org/10.24036/jtev.v6i2.108911

Full Text:    Language : en

Abstract


A three-phase induction motor is one of the electric machines and is classified as an AC motor that is widely used in the industrial world. The development of control systems in the industry will not be separated from the data communication system. To send data from the field (sensor) to the controller, for communication between controllers, to send data from the controller to the computer, all require data communication. One of the most widely used data communication systems in industrial control systems is the Modbus protocol. Even in the world of education there are also many studies that develop control systems using modbus communication. The speed regulation of three phase induction motor can be done in various ways one of them is by using Variable Speed Drive which functions to adjust the frequency of the source so as to get the desired motor speed (rpm). Communication between VSD, Arduino and PC with the MODBUS protocol is a system built to be able to monitor the performance of a three phase induction motor.


Keywords


Motor Induksi Tiga Phasa, Sistem Monitoring, Atmega2560, Inverter, Visual Basic.

References


Evalina, Noorly, Zulfikar, and A. Azis, “Pengaturan kecepatan putaran motor induksi 3 fasa menggunakan programmable logic controller,” J. Electr. Technol., vol. 3, no. 2, pp. 73–80, 2018.

Nugroho, Agung, and Emmanuel, “Implementasi sistem kendali variable speed drive pada inverter 3 fasa menggunakan mikrokontroller AT89S52,” Simetris J. Tek. Mesin, Elektro dan Ilmu Komput., vol. 9, no. 1, pp. 413–424, 2018, doi: 10.24176/simet.v9i1.1988.

Pranata, Yogi, Arfianto, Teguh, Taryana, and Nandang, “Analisis unjuk kerja motor induksi 3 fasa menggunakan inverter 3 fasa,” TELKA - Telekomun. Elektron. Komputasi dan Kontrol, vol. 4, no. 2, pp. 91–102, 2018, doi: 10.15575/telka.v4n2.91-102.

Bartoletti et al., “The design of a proximity inductive sensor,” Meas. Sci. Technol., vol. 9, no. 8, pp. 1180–1190, 1998, doi: 10.1088/0957-0233/9/8/007.

I.S., Rifdian, Hartono, and Hartono, “Desain dan simulasi motor induksi 3 fasa dengan menggunakan matlab,” J. Penelit., vol. 4, no. 2, pp. 70–77, 2019, doi: 10.46491/jp.v4e2.298.70-77.

Sariman et al., “Perbandingan Pengendali PI, PD dan PID pada pengendalian kecepatan motor induksi tiga fasa dengan memanfaatkan supervisory control and data acquisition (SCADA),” J. SURYA ENERGY, vol. 3, no. 2, p. 276, 2019, doi: 10.32502/jse.v3i2.1546.


Article Metrics

 Abstract Views : 1624 times
 PDF Downloaded : 558 times

Refbacks

  • There are currently no refbacks.