Desain dan Verifikasi Kontrol Cascade Pengendali Suhu Berbasis Fuzzy-PID dan PI pada Heat Exchanger

Yusuf Efendi

doi:10.24036/jtev.v5i1.1.106156

Desain dan Verifikasi Kontrol Cascade Pengendali Suhu Berbasis Fuzzy-PID dan PI pada Heat Exchanger

Yusuf Efendi⁽¹⁾,
(1) Universitas Muhammadiyah Malang

Indonesia

Corresponding Author

DOI : https://doi.org/10.24036/jtev.v5i1.1.106156

Full Text:

Language : en

Abstract

In industry, in controlling heat exchanger temperature, there exist some disturbances that potentially affect the performance of the heat exchanger. One of them is the change of outside temperature. This study proposes cascade control techniques with fuzzy-PID and PI methods, respectively as primary and secondary controllers to overcome the disturbance and to result more stable performance of the system. Verification on the cascade fuzzy-PID control technique showed performance of the system was improved in term of rise time (tr), overshoot (mp), and settling time (ts). Cascade control technique played a role in handling the changes of system parameters, while the combination of fuzzy-PID overcame the interference. The combination of feedback control and cascade control techniques with fuzzy-PID method can make the performance of the system more stable and overcome the interference.

Keywords

cascade control, feedback control, fuzzy-PID, heat exchanger, temperature

References

[1] P. Nowak and J. Czeczot, “Observer-Based Cascade Control of the Heat Distribution System,” pp. 633–638, 2013.

[2] J. Zhang, F. Zhang, M. Ren, G. Hou, and F. Fang, “Cascade control of superheated steam temperature with neuro-PID controller,” ISA Trans., vol. 51, no. 6, pp. 778–785, 2012.

[3] Y V Pavan Kumar, “Cascaded PID Controller Design for Heating Furnace nTemperature Control,” IOSR J. Electron. Commun. Eng., vol. 5, no. 3, pp. 76–83, 2013.

[4] Z. Wu, D. Li, and L. Wang, “Control of the superheated steam temperature: A comparison study between PID and fractional order PID controller,” Chinese Control Conf. CCC, vol. 2016–Augus, no. 1, pp. 10521–10526, 2016.

[5] C. Xiuying, G. Tao, L. Hengzhi, and Z. Jin, “Adaptive cascade generalized predictive control,” Proc. 28th Chinese Control Decis. Conf. CCDC 2016, no. July, pp. 494–499, 2016.

[6] F. Firmansyah and I. A. Sulistyawan, “Temperature Control for a Pasteurization Miniplant using Multiloop and Cascade Controllers,” pp. 32–37, 2016.

[7] L. T. Pengaturan and J. T. Elektro-fti, “PERANCANGAN DAN IMPLEMENTASI DISTURBANCE OBSERVER SIMULATOR MESIN FREIS Ali Fatoni , Josaphat Pramudijanto , Alfius Yonatan,” pp. 1–7, 2003.

[8] Y. Cao, C. Zhong, and K. Qiu, “Design and Experiment About Temperature Control System Of Sealing Machine Based On Fuzzy PID,” 2016.

[9] Z. Has, A. H. Muslim, and N. A. Mardiyah, “Adaptive-Fuzzy-PID Controller Based Disturbance Observer for DC Motor Speed Control,” no. September, pp. 19–21, 2017.

[10] Zulfatman and M. F. Rahmat, “Application of Self-Tuning Fuzzy Pid Controller on Industrial Hydraulic Actuator,” Nternational J. Smart Sens. Intell. Syst., vol. 2, no. 2, pp. 246–261, 2009.

[11] E. Ezzat Ismail and O. M. ElSaid, “Improving the Performance of Heat Exchanger System by better Control Circuits,” Int. J. Comput. Appl., vol. 121, no. 11, pp. 975–8887, 2015.