Perancangan dan Pembuatan Sistem Kontrol Dispenser Otomatis Menggunakan NodeMCU ESP8266 Berbasis Internet of Things (IoT)

Nofrizal Nofrizal(1), Winda Agustiarmi(2),
(1) Universitas Negeri Padang  Indonesia
(2) Universitas Negeri Padang  Indonesia

Corresponding Author


DOI : https://doi.org/10.24036/voteteknika.v12i1.125494

Full Text:    Language : id

Abstract


Tujuan perancangan dan pembuatan sistem kontrol Dispenser Otomatis menggunakan NodeMCU ESP8266 berbasis Internet of Things (IoT) untuk memberikan alternatif solusi kepada pengguna yang tidak memiliki waktu luang yang cukup dalam menggunakan dispenser secara maksimal, serta memberikan informasi suhu air, volume air dan notifikasi kepada pengguna melalui smartphone. Alat ini dirancang dengan menggunakan metode waterfall yang meliputi analisis kebutuhan, desain sistem, implementasi, testing, uji coba dan maintenance. Pengendali utama Sistem menggunakan modul NodeMCU ESP8266, dilengkapi dengan rangkaian input, berupa RTC, sensor suhu DS18B20, push button, water float sensor switch, dan buzzer. Sistem kontrol ini dapat mengendalikan dispenser secara manual menggunakan push button dan otomatis menurut jadwal yang diatur dalam aplikasi Blynk IoT. Hasil yang diperoleh adalah bahwa sistem kontrol dispenser otomatis menggunakan NodeMCU ESP8266 berbasis Internet of Things (IoT) dapat berjalan sesuai yang diharapkan.

Kata kunci : Sistem Kontrol,  NodeMCU ESP8266, Internet of Things,

 

The aim of designing and creating an Automatic Dispenser control system using NodeMCU ESP8266 based on the Internet of Things (IoT) is to provide an alternative solution to users who do not have enough free time to use the dispenser optimally, as well as providing information on water temperature, water volume and notifications to users via smartphones. This tool was designed using the waterfall method which includes requirements analysis, system design, implementation, testing, trials and maintenance. The system's main controller uses the NodeMCU ESP8266 module, equipped with an input circuit, in the form of RTC, DS18B20 temperature sensor, push button, water float sensor switch, and buzzer. This control system can control the dispenser manually using a push button and automatically according to a schedule set in the Blynk IoT application. The results obtained are that the automatic dispenser control system using NodeMCU ESP8266 based on Internet of Things (IoT) can run as expected.

Keywords: Control System, NodeMCU ESP8266, Internet of Things,


References


Aphamis, G., Stavrinou, P. S., Andreou, E., & Giannaki, C. D. (2019). Hydration status, total water intake and subjective feelings of adolescents living in a hot environment, during a typical school day. International Journal of Adolescent Medicine and Health, 33(4), 20180230.

Clark, W. F., Huang, S. H., Garg, A. X., Gallo, K., House, A. A., Moist, L., ... & Sontrop, J. M. (2017). The chronic kidney disease water intake trial: Protocol of a randomized controlled trial. Canadian Journal of Kidney Health and Disease, 4, 2054358117725106.

Stookey, J. D., & König, J. (2018). Describing water intake in six countries: results of Liq. In 7 surveys, 2015–2018. European Journal of Nutrition, 57, 35-42.

Burange, A. W., & Misalkar, H. D. (2015, March). Review of Internet of Things in development of smart cities with data management & privacy. In 2015 International Conference on Advances in Computer Engineering and Applications (pp. 189-195). IEEE.

Dewi, N. H. (2019). Prototype Smart Home Dengan Modul Nodemcu Esp8266 Berbasis Internet of Things (IOT). 3.

Samsugi, S., Gunawan, R. D., Priandika, A. T., & Prastowo, A. T. (2022). Penerapan Penjadwalan Pakan Ikan Hias Molly Menggunakan Mikrokontroler Arduino UNO dan Sensor RTC DS3231. Jurnal Teknologi dan Sistem Tertanam, 3(2).

Burhanudin, I., & Haryudo, S. I. (2020). Pengereman Elektrik Dengan Membalikkan Arah Putar Menggunakan Zero Speed Switch Sebagai Pengendali. Jurnal Teknik Elektro, 9(1).

Utama, YAK (2016). Perbandingan Kualitas Antar Sensor Suhu dengan Menggunakan Arduino Pro Mini. e-NARODROID: Jurnal Berkala Program Studi Sistem Komputer , 2 (2), 145-150.

Basri, I. Y., & Irfan, D.2018. Komponen Elektronika. Padang: Sukabina press.

Saravanakumar, K., & Logeshwaran, J. (2016). Auto-Theft prevention system for underwater sensor using lab view. International Journal of Innovative Research in Computer and Communication Engineering, 4(2), 1750-1755.

Listiyan, E., & Subhiyakto, E. R. (2021). Rancang Bangun Sistem Inventory Gudang Menggunakan Metode Waterfall Studi Kasus Di Cv. Aqualux Duspha Abadi Kudus Jawa Tengah. KONSTELASI: Konvergensi Teknologi dan Sistem Informasi, 1(1), 74-82.


Article Metrics

 Abstract Views : 354 times
 PDF (Bahasa Indonesia) Downloaded : 86 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.