1. Home
  2. Vol 5, No 2 (2019)
  3. Ta`ali

Pelatihan PLC dan Elektropneumatik untuk Meningkatkan Kompetensi Profesional Guru SMK Bidang Ketenagalistrikan: Pendekatan Revolusi Industri 4.0

Ta`ali Ta`ali(1), Aswardi Mawardi(2), Doni Tri Putra Yanto(3),
(1) Universitas Negeri Padang  Indonesia
(2) Universitas Negeri Padang  Indonesia
(3) Universitas Negeri Padang  Indonesia

Corresponding Author


DOI : https://doi.org/10.24036/jtev.v5i2.106722

Full Text:    Language : Indonesia

Abstract


This study discusses efforts to improve one of the competencies of Vocational High School (SMK) teachers in the field of Electricity, namely professional competence, through the implementation of the Programmable Logic Control (PLC) and Electropneumatics training program. the training program is designed in the form of learning processes namely learning theory and practice that is shared into two main materials namely PLC and Electropneumatics. Both of these materials are one part of industrial automation material that needs to be understood by every teacher to be taught to students because vocational learning materials must be adaptive to the latest developments in science and technology. The latest development of this century is termed the Industrial Revolution 4.0. The subjects of this study are 20 teachers in the field of electricity in SMK Negeri 1 Bukittinggi. The results showed that after the implementation of the training program there is an increase in the professionalism of teachers in the field of industrial automation especially PLC and Electropneumatics indicated by the participants' posttest results which reached 85,6% graduation for the two materials. Thus, it can be concluded that PLC and Electropneumatics training for teachers can improve the professional competence of teachers in the field of industrial automation by the development of the industrial revolution 4.0

Keywords


Improvement, Professional Competence, Teachers, PLC, Electropneumatics

References


A. Ahyanuardi, H. Hambali, and K. Krismadinata, “Pengaruh Kompetensi Pedagogik Dan Profesional Guru Sekolah Menengah Kejuruan Pasca Sertfikasi Terhadap Komitmen Guru Melaksanakan Proses Pembelajaran,” INVOTEK J. Inov. Vokasional dan Teknol., vol. 18, no. 1, pp. 67–74, 2018.

F. Eliza, Hastuti, D. E. Myori, and D. T. P. Yanto, “Peningkatan Kompetensi Guru Sekolah Menengah Kejuruan melalui Pelatihan Software Engineering,” vol. V, no. 1, pp. 37–45, 2019.

T. Frattini and E. Meschi, “The effect of immigrant peers in vocational schools,” Eur. Econ. Rev., vol. 113, pp. 1–22, 2019.

H. Biemans, M. Mulder, and R. Wesselink, “Competence-based VET in the Netherlands :,” J. Vocat. Educ. Train., vol. 56, no. 4, pp. 523–538, 2004.

M. Christidis, “Vocational knowing in subject integrated teaching: A case study in a Swedish upper secondary health and social care program,” Learn. Cult. Soc. Interact., vol. 21, no. January, pp. 21–33, 2019.

M. Mulder, T. Weigel, and K. Collins, “The concept of competence in the development of vocational education and training in selected EU member states: A critical analysis,” J. Vocat. Educ. Train., vol. 59, no. 1, pp. 67–88, 2007.

N. R. Ergül and E. K. Kargın, “The Effect of Project based Learning on Students’ Science Success,” Procedia - Soc. Behav. Sci., vol. 136, pp. 537–541, 2014.

Y. Luo and W. Wu, “Sustainable Design with BIM Facilitation in Project-based Learning,” Procedia Eng., vol. 118, pp. 819–826, 2015.

Made Wena. Strategi Pembelajaran Inovatif Kontemporer. Jakarta: Bumi Aksara, 2010.

Bimbra P. S. Electrical Machinery. New Delhi: Khanna Publishers, 1975.

Badan Standardisasi Nasional. Persyaratan Umum Instalasi Listrik 2000. Jakarta: Yayasan PUIL, 2000.

Chapman Stephen J., Electric Machinery Fundamentals, 3rd Edition, Mc Graw – Hill Book Company, Singapore, 1999.

Chaidir Arsyad. Reparasi Motor Listrik Berdaya Kecil. FPTK IKIP Padang, 1994.

Popular Mechanics. Home Appliance Repair Manual. Hearst Books. New York, 1997.

Muhammad Yaumi. Prinsip-prinsip desain pembelajaran. Jakarta : Kencana prenada media group, 2013.

Nana Sudjana. Penilaian Hasil Proses Belajar Mengajar. Bandung: PT. Remaja Rosdakarya, 2011.

Rusman. Model-model Pembelajaran Mengembangkan Profesionalisme Guru. Jakarta: PT Rajagrafindo Persada, 2010


Article Metrics

 Abstract Views : 1496 times
 PDF Downloaded : 681 times

Refbacks

  • There are currently no refbacks.