DEVELOPMENT OF STEM EDUCATION INTEGRATED SOUND AND LIGHT WAVES E-MODULE FOR CRITICAL AND CREATIVE THINKING SKILLS OF HIGH SCHOOL STUDENTS

Nadila Fathiya - Department of Physics, Universitas Negeri Padang, Jl. Prof. Dr. Hamka Air Tawar Padang 25131, Indonesia
Asrizal Asrizal - Department of Physics, Universitas Negeri Padang, Jl. Prof. Dr. Hamka Air Tawar Padang 25131, Indonesia

Abstract


21st-century education is an education described by the utilization of computerized innovation in the educational experience to further develop student's critical and creative thinking skills. The integrated teaching module of STEM education is still low, this is obtained from the analysis of STEM integration in textbooks, which is 57.89. The answer for defeat these issues is to foster a coordinated sound wave and light wave e-module in STEM schooling. This study aims to reveal the validity of the integrated sound wave and light wave e-module in STEM education. This type of research is included in research and development. This study uses the ADDIE development model. The instrument in this study used a content validity sheet. Technical analysis of the data in this study using Aiken's V. In view of the outcomes of the analysis of Aiken's V obtained a value of 0.83. Product validity is interpreted as a high validity category because the score is 0.8. In view of the aftereffects of this review, it was inferred that the e-module of sound waves and light waves integrated with STEM education was in the valid category and could be used in learning in schools on aspects of material substance, visual communication display, instructional design, software usage, and STEM assessment. Researchers hope that this e-module can be a reference for technology-based learning resources to create meaningful learning to encourage the improvement of high school students critical and creative thinking skills.

Full Text:

PDF

References


Suwardana, H. (2018). Industrial Revolution 4.0 Based on Mental Revolution. TEAK UNIK: Scientific Journal of Industrial Engineering and Management, 1.2: 109-118.

Wurianto, AB (2018) Development of Vocational Education in the Socio-Humanities Sector Facing the Industrial Revolution Era 4.0. In: Proceedings of the Indonesian Vocational National Seminar. p. 89-94.

Mukhadis, A. (2013). The Indonesian Human Figure is Superior and Has Character in the Field of Technology as a Demand for Life in the Era of Globalization. Journal of Character Education, 4.2.

Rahayu, R., Iskandar, S., Abidin, Y.(2020). 21st Century Learning Innovation and Its Application in Indonesia. Journal of Basicedu, 6.2:2099-2104.

Mu'minah, IH, & Aripin, I. (2019). Implementation of STEM in 21st Century Learning. In Proceedings of the National Seminar on Education. (Vol. 1, pp. 1495-1503).

Padwa, TR, & Erdi, PN (2021). Use of E-Modules With Project Based Learning System. Journal of Vocational Informatics, 21-25.

Herawati, NS, & Muhtadi, A. (2018). Development of Interactive Electronic Modules (E-Modules) in Class XI High School Chemistry Subjects. Journal of educational technology innovation, 5(2), 180-191.

Asrizal, A., Zan, AM, Mardian, V., & Festiyed, F. (2022). The Impact Of Static Fluid E-Module By Integrating STEM On Learning Outcomes Of Students.Journal of Education Technology, 6(1).

Serevina, V., Astra, I., & Sari, IJ (2018). Development Of E-Module Based On Problem Based Learning (PBL) On Heat And Temperature To Improve Student's Science Process Skill. Turkish Online Journal of Educational Technology-TOJET, 17(3), 26-36.

Komikesari, H., Mutoharoh, M., Dewi, PS, Utami, GN, Anggraini, W., & Himmah, EF (2020). Development Of E-Module Using Flip Pdf Professional On Temperature And Heat Material. In Journal of Physics: Conference Series (Vol. 1572, No. 1, p. 012017). IOP Publishing.

Watin, E., & Kustijono, R. (2017). Effective Use of E-Books With Flip PDF Professional To Practice Science Process Skills. In Proceedings of the National Seminar on Physics (SNF) (Vol. 1, pp. 124-129).

Professional, FPDF, Flip, W., Professional, PDF, Windows, F., Service, O., & Upgrade, P. (2019). Flip PDF Professional Interactive publishing - add video , image , link and.

Syahiddah, DS, Putra, PDA, & Supriadi, B. (2021). Development of STEM-Based Physics E-Modules (Science, Technology, Engineering, and Mathematics) on Sound Materials in SMA/MA. Journal of Physical Education Learning, 2(1),1-8.

Akaygun, S., & Aslan-Tutak, F. (2016). STEM Images Revealing STEM Conceptions Of Pre-Service Chemistry And Mathematics Teachers. International Journal of Education in Mathematics, Science and Technology, 4(1), 56-71.

Shernoff, DJ, Sinha, S., Bressler, DM, & Ginsburg, L. (2017). Assessing Teacher Education And Professional Development Needs For The Implementation Of Integrated Approaches To STEM Education. International Journal of STEM Education, 4(1), 1-16.

Latip, A. (2020). Learning Interest of Junior High School Students in STEM Learning with Educational Robot Media. Journal of Physical Education Learning, 1(02), 90-96.

Asrizal, A., Amran, A., Ananda, A., Festiyed, & Khairani, S. Effectiveness Of Integrated Science Instructional Material On Pressure In Daily Life Theme To Improve Digital Age Learning Of Students. Journal of Physics:Conf. Series, 1006(01203), 2018 :1-8

Partono, P., Wardhani, HN, Setyowati, NI, Tsalitsa, A., & Putri, SN (2021). Strategy to Improve 4C Competence (Critical Thinking, Creativity, Communication, & Collaborative). Journal of Educational Science Research, 14(1), 41-52.

Usmeldi, U., Amini, R., & Trisna, S. (2017). The Development Of Research-Based Learning Model With Science, Environment, Technology, And Society Approaches To Improve Critical Thinking Of Students. Indonesian Journal of Science Education, 6(2), 318-325.

Mursidik, ESM, Samsiyah, N., & Rudyanto, HE (2015). Creative Thinking Ability In Solving Open-Ended Mathematical Problems Viewed From The Level Of Mathematics Ability Of Elementary School Students. Pedagogia: Journal of Education, 4(1), 23-33.

Musnidar, L. Effect of Application of STEM (Science, Technology, Engineering, Mathematics) Learning on Students' Creative Problem Solving and Communication Skills. Proceedings of SEMNAS MIPA IV, 2018, 174-179.

Khoiriyah, N., Abdurrahman, A., & Wahyudi, I. (2018). Implementation of STEM Learning Approach to Improve Critical Thinking Ability of High School Students on Sound Wave Material. Journal of Physics Education Research and Studies, 5(2), 53.

Istyowati, A., Kusairi, S., & Handayanto, SK (2017). Analysis of Learning and Difficulty of Class Xi High School Students on Mastery of Physics Concepts. Research Reports.

Ghaliyah, S., Bakri, F., & Siswoyo, S. (2015). Development of an electronic module based on the 7E learning cycle model on the subject of fluid dynamics for class XI high school students. In Proceedings of the National Seminar on Physics (E-Journal) (Vol. 4, pp. SNF2015-II).

Suryadie. (2014). Development of Shared Type Integrated Science Electronic Module for Class VIII SMP/MTs Students. Yogyakarta: UIN Sunan Kali Jaga.

Wiyoko, T., Sarwanto, & Rahardjo, DT (2014). Development of Physics Learning Media Interactive Animation Electronic Module for Class XI SMA in terms of Student Learning Motivation. Journal of Physics Education Vol.2 No.2 , 11-15

Hamzah, I., & Mentari, S. (2017). Development of Accounting E-Module to Support the Scientific Approach of Students Grade X Vocational High School. Journal of Accounting and Business Education, 2(1), 78–88.

Krajcik, J., & Delen, . (2017). Engaging Learners In STEM Education. Eesti Haridusteaduste Ajakiri. Estonian Journal of Education, 5(1): 35–58.

Fikri, MR, Muslim, M., Purwana, U., & Employees, K. (2019). Efforts to Increase Students' Creativity in Making Physics Works Through STEM-Based Learning Models (Science, Technology, Engineering and Mathematics) in Static Fluids. WaPFi (Wahana for Physics Education). 4(1):73

Kapila, V. & Iskander, M. (2014). Lessons Learned From Conducting A K12 Project To Revitalize Achievement By Using Instrumentation In Science Education. Journal of STEM Education, 15(1), pp. 46-51

Pawilen, GT, & Yuzon, MRA (2019). Planning a Science, Technology, Engineering, and Mathematics (STEM) Curriculum for Young Children: A Collaborative Project for Pre-service Teacher Education Students conditions of the Creative Commons Attribution license (CC BY-NC-ND). International Journal of Curriculum and Instruction. 11(2):130–146.

Jenicek, M. (2006). A Physician's Self-Paced Guide to Critical Thinking. Chicago: AMA Press

Shakirova, DM (2007). Technology For The Shaping Of College Students' And Upper-Grade Students' Critical Thinking. Russian Education & Society, 49(9), 42–52.

Behar-Horenstein, LS, & Niu, L. (2011). Teaching Critical Thinking Skills In Higher Education: A Review Of The Literature. Journal of College Teaching & Learning (TLC), 8(2).

Snyder, LG, & Snyder, MJ (2008). Teaching Critical Thinking And Problem Solving Skills. The Journal of Research in Business Education, 50(2), 90.

Robinson, K. 2006. Do Schools Kill Creativity? In Presentation at TED2006 conference, Monterey,CA.

Ketabi, S., Zabihi, R. & Ghadiri, M. (2013). Bridging Theory and Practice: How Creative Ideas Flourish through Personal and Academic Learning Practices. In International Journal of Research Studies in Psychology. 2 (2):61—70

Dwi, E. (2013). Development of 4 C's Indicators That Are Aligned with the 2013 Curriculum in Mathematics Subjects for SMP/MTS Class VII Semester 2. University of Jember, page: 139

Saifuddin, A. (2015). Reliability and Validity Edition IV, Issue IV. Yogyakarta: Student Library.

Athiyyah, R., Al Farizi, T., & Nanto, D. (2020). Improvement Of Science Process Skills Through Sound Variable Intensity Level Tool Kit. Journal of Physics Education Research & Development, 6(1), 89-96.

Izzah, N., Asrizal, A., & Festiyed, F. (2021). Meta Analysis of Effect Size The Effect of STEM-Based Science and Physics Teaching Materials on Student Learning Outcomes. Journal of Physical Education, 9(1), 114-130.

Ritonga, S., & Zulkarnaini, Z. (2021). Application of the STEM Approach to Improve Students' Critical Thinking Skills. Journal of Teacher Studies and Learning, 4(1), 75-81.

Kristen, KD, Mayasari, T., & Kurniadi, E. (2017). The Effect of STEM-Pjbl Learning on Creative Thinking Skills. In Proceedings of SNPF (National Seminar on Physics Education) (pp. 266-274).




DOI: http://dx.doi.org/10.24036/13528171074