Metode Cutting Plane dan Analisis Sensitivitas pada Optimasi Keuntungan Penjualan Usaha Kue Putu Asli M*R

Moni Sarisa - Universitas Negeri Padang
Dewi Murni - Universitas Negeri Padang

Abstract


The M*R Original Putu Cake business is located in Balingka village, IV Koto District, Agam Regency, West Sumatra. This business produces three types of putu cakes, namely white baked putu, black baked putu, and steamed putu. The purpose of this study is to determine the optimal amount of production using the cutting plane method and to determine the range of changes that can be made to the production factors using sensitivity analysis. The result gives, the optimal production quantities of white baked putu, black baked putu, and steamed putu are 9.998 packs, 4.835 packs, and 3.000 packs, respectively. Meanwhile, through sensitivity analysis, it is concluded that changes in production factors will not affect the optimal solution as long as it is within the range of the maximum upper limit and minimum lower limit according to the calculated output.


Full Text:

PDF

References


Indah, Dewi Rosa, dan Purnita Sari. 2019. Penerapan Model Linier Programming untuk Mengoptimalkan Jumlah Produksi dalam Memperoleh Keuntungan Maksimal (Studi Kasus pada Usaha Angga Perabot). Jurnal Manajemen Inovasi, 10(2), 98-115.

Carter, Michael W, Camille C Price, dan Gaith Rabadi. 2019. Operations Research : A Practical Introduction, Second Edition. Boca Raton : Taylor & Francis Group.

Hartono, Widi, Alfichri Dilian Yanuar Agus Putri, dan Sugiyarto. 2014. Integer Programming dengan Pendekatan Metode Brach and Bound untuk Optimasi Sisa Material Besi (Waste) pada Plat Lantai (Studi Kasus: Pasar Elpabes Banjarsari Surakarta. E-Jurnal Matriks Teknik Sipil, 2(2), 86-92.

Maslihah, Siti. 2015. Metode Pemecahan Masalah Integer Programming. Jurnal at-Taqaddum, 7(2), 211-226.

Syahrini, Intan, Radhiah, dan Faizah Amalina. 2019. Mengoptimalkan Keuntungan Produksi Dengan Menggunakan Metode Branch And Bound Dan Metode Cutting Plane (Studi Kasus: Cindelallaatelier). Seminar Nasional Matematika dan Terapan, Vol 1, 923-30.

Wijaya, Andi. 2011. Pengantar Riset Operasi. Jakarta: Mitra Wacana Media.

Nico, Iryanto dan G. Tarigan. 2014. Aplikasi Metode Cutting Plane dalam Optimisasi Jumlah Produksi Tahunan pada PT.XYZ. Jurnal Saintika Matematika, 2(2), 127-136.




DOI: http://dx.doi.org/10.24036/unpjomath.v7i3.13016