Pengendalian Mutu Alat Skir Katup Otomatis Menggunakan Peta Kendali dengan Metode Bootstrap

Yuvani Oksarianti - Universitas Negeri Padang
Dina Fitria - Universitas Negeri Padang

Abstract


Compression leaks occur in valves caused by soot resulting from the combustion process of the combustion engine. To overcome valve leaks, it’s necessary to clean using an innovative tool called valve grinding automatic system. The purpose of this study was to determine the quality of this tool based on the control chart using the bootstrap method. Based on the research results, the control charts X ̅ dan R show that the cleaning process is in a controlled and stable state (in statistical control). The quality of the valve cleaning process using this tool is able of producing cleaning according to standard cleaning specifications.


Full Text:

PDF

References


Badan Pusat Statistik, Statistik Transportasi Darat 2020, Jakarta: Badan Pusat Statistik Repubik Indonesia, 2021.

Irwan, Suyatno A., Fuhaid N., “Pengaruh Celah Katup Terhadap Daya dan Efisiensi Pada Motor Matic,” in PROTON, vol. 6, no. 1, pp. 36-41, 2014, doi: 10.31328/jp.v6i1.177.

Nugroho, E., and Saputra, D, “Pengaruh Arah Variasi Putaran dan Tumbukan Terhadap Performa Hasil Penyekiran Menggunakan Mesin Skir Klep,” in Turbo: Jurnal Program Studi Teknik Mesin, vol. 4, no. 2, pp. 61-66, 2017, [Online]. Available: https://ojs.ummetro.ac.id/index.php/turbo/article/download/71/58.

Suyadi, A. P., Putro, W. D., & Mesin, E. A. J. T, “Penerapan Elektro Pneumatik pada Alat Bantu Sekur Katup Menggunakan Gerak Linier Silinder Pneumatik yang diubah menjadi Gerak Rotasi,” in Rekayasa Mesin, vol. 13, no. 2, pp. 67-72, 2018, [Online]. Available: https://jurnal.polines.ac.id/index.php/rekayasa/article/download/1249/106351.

Van Harling, V. N., “Pengaruh Variasi Penyetelan Katup Terhadap Putaran Pada Engine Stand Motor Bensin,” in Pendidikan Teknik Mesin Undikhsa Journal, vol. 8, no. 2, pp. 79-85, 2020, doi: 10.23887/jptm.v8i2.26637.

Widodo, Noto, “Penerapan Mesin Skur Katup Sistem Elektrik Untuk Meningkatkan Produktivitas Bengkel Servis Sepeda Motor,” in Inotek, vol. 3, no. 2, pp. 11-13, 2001, doi: 10.21831/ino.v3i1.5138.

Pratama, Y. A, “Journal of Automotive Engineering and Vocational Education,” AEEJ: Journal of Automotive Engineering and Vocational Education, vol. 2, no. 1, pp. 33-44, 2021, doi: 10.24036/aeej.v2i1.64.

Selvamuthu, D., Das, Dipayan, Introduction to Statistical Methods, Design of Experiments and Statistical Quality Control. Singapore: Springer Nature Singapore, 2018.

Sonalia, D., & Hubeis, M, “Pengendalian Mutu Pada Proses Produksi Di Tiga Usaha Kecil Menengah Tahu Kabupaten Bogor,” in Jurnal Manajemen dan Organisasi, vol. 4, no. 2, pp. 112-127, 2013, doi: 10.29244/jmo.v4i2.12618.

Montgomery, D. C., Introduction to Statistical Quality Control: 7th edition, USA: Wiley, 2013.

Walpole, Ronald E., et all, Probability & Statistics for Engineers & Scientists: Ninth Edition, USA: Pearson, 2012.

Sembiring, Safrina, “Estimasi Bias Menggunakan Bootstrap dan Jakknife,” M.S. thesis, Dept. Math and Sciens, North Sumatera University, Medan, Indonesia, 2014.

Efron, B., and J. Tibshirani, Robert, An introduction to the Bootstrap, German: Springer-Science+Business Media, B.V, 1993.

Atinri, O. Yozza, H. Asdi, Y, “Penentuan Ukuran Contoh dan Replikasi Bootstrap Untuk Menduga Model Regresi Linear Sederhana,” in Matematika UNAND Journal, vol. 3, no. 2, pp. 53-61, 2014.

Solih, A. A, “Estimasi Confidence Interval Bootstrap Untuk Analisis Data Sampel Terbatas,” in ISTEK Journal, vol. 9, no.1, pp. 17-31, 2015, [Online]. Available: https://journal.uinsgd.ac.id/index.php/istek/article/download/168/184.

Wang, C. H., & Chen, K. S., “New Process Yield Index of Asymmetric Tolerances for Bootstrap Method and Six Sigma Approach,” in International Journal of Production Economics, vol. 219, pp. 216-223, 2020, doi:10.1016/j.ijpe.2019.05.004.

Chernick, Michael R., and LaBudde, Robert A, An Introduction to Bootstrap Methods with Applications to R, Canada: John Wiley & Sons, Inc, 2011.

Render B., Heizer J, Operation Management: Sustainability and Supply Chain Management: Twelfth Edition, USA: Pearson, 2017.

Wardhana, M. W., Sulastri, S., & Kurniawan, E. A., “Analisis peta kendali variabel pada pengolahan produk minyak sawit dengan pendekatan statistical quality control (SQC),” in Rekayasa, Teknologi, dan Sains Journal, vol. 2, no. 1, pp. 27-34, 2018, doi: 10.33024/jrets.v2i1.1114.

Sutedja, A., & Ahmaddien, I, Pengantar Statistika, Bandung: Widina Bhakti Persada Bandung, 2020.

Cahyono, Tri, Statistik Uji Normalitas, Purwokerto: Yayasan Sanitarian Banyumas (Yasamas), 2015.

Nasrum, A., “Statistical Determination of Kolmogorov-Smirnov (D) by Using Manual Way,” in Journal of Math Sciences, vol. 2, no. 2, pp. 1-4, 2017, [Online]. Available: http://usnsj.com/index.php/JMS/article/view/2.2.1-4.

Csillik, O., Evans, I.S., and Drăguţ, L., “Transformation (normalization) of slope gradient and surface curvatures, automated for statistical analyses from DEMs,” in Geomorphology, vol. 232, pp. 65-77, 2015, doi: 10.1016/j.geomorph.2014.12.038.

Abdullah, Arafat M., “Aplikasi Peta Kendali Statistik Dalam Mengontrol Hasil Produksi Suatu Perusahaan,” in Saintifik Journal, vol. 1, no. 1, pp. 5-13, 2015, doi: 10.31605/saintifik.v1i1.71.

Lindsay, W. M. and J. R. Evans, An Introduction to 6 Sigma and Process Improvement, Jakarta: Salemba Empat, 2007.




DOI: http://dx.doi.org/10.24036/unpjomath.v7i3.12598