SIX-STEP INVERTER UNTUK MENGENDALIKAN MOTOR 3 FASA ARUS SEARAH TANPA SIKAT BERBASIS ARDUINO

Mamal Daputra(1), Zulwisli Zulwisli(2),
(1) Universitas Negeri Padang  Indonesia
(2) Universitas Negeri Padang  Indonesia

Corresponding Author



Full Text:    Language : id

Abstract


This research is motivated by the many needs in the use of electric motors. Electric motors with DC voltages that are often used today are less effective and efficient because of the use of brushes that will run out when used. To overcome the weaknesses of this DC motor, then used Brushless Direct current Motor (MASTS). MASTS is a three phase AC motor. In a fixed application, a three phase AC voltage source can be used directly. In a mobile application, it takes an AC voltage sourced from a DC voltage. For this reason, an inverter is designed to convert DC voltage into three phase AC. The method in controlling MASTS is a six-step inverter that is changing the DC voltage to AC voltage in the form of a box or trapezoid. This inverter uses MOSFET IRF3205 and Arduino microcontroller. To find out the performance of the inverter, MOSFET driver voltage measurements, measurement of the output current, and measurement of the resulting MASTS speed. From the measurement results, when the voltage is increased the current in the circuit and the speed of the MASTS will increase.

 

Keywords: Inverter, MASTS, Phase, Six-Step.


References


Yedamale, P. (2003). Brushless DC (BLDC) motor fundamentals. Microchip Technology Inc, 20, 3-15.

Andika, R. J., Rusdinar, A., & Wibowo, A. S. (2018). Perancangan dan Implementasi Driver Motor Tiga Fasa untuk Pengendali Kecepatan Motor BLDC berbasis PWM pada Mobil Listrik. eProceedings of Engineering, 5(1).

Ridhwan, M. T. Rancang Bangun Penggerak Daya Motor Brushless Dc 350w/48v Design And Implementation Of Power Driver Brushless Direct Current Motor 350w/48v.

Jatmiko, J., Basith, A., Ulinuha, A., Muhlasin, M. A., & Khak, I. S. (2018). Analisis Peroforma Dan Konsumsi Daya Motor Bldc 350 W Pada Prototipe Mobil Listrik Ababil. Emitor: Jurnal Teknik Elektro, 18(2), 14-17.

Arsya, N. R., Suryoatmojo, H., & Anam, S. (2016). Design Of Speed Control Bruhless Dc Motor Based Power Factor Correction (Pfc) Using Single Ended Primary Inductance Converter (Sepic). Jurnal Teknik ITS, 5(2), B76-B82.

Azzumar, M. (2012). Pemodelan dan simulasi brushless DC motor kecil untuk aplikasi aktuator sirip roket. Depok: Universitas Indonesia.

Said, F. S. (2017). Rancang Bangun Kontrol Kecepatan Motor Bldc Menggunakan Pid Controller Pada Wind Tunnel Sebagai Prototipe Pengujian Turbin Angin. Jember: Universitas Jember.


Article Metrics

 Abstract Views : 33 times
 PDF Downloaded : 3 times

Refbacks

  • There are currently no refbacks.