Pengurangan Aktivitas Non-Value AddedDalam Alur Proses Pelayanan Kesehatan Dengan Pendekatan Lean Six Sigma

Rafika Hayati - Universitas Negeri Padang
Gesit Thabrani - Universitas Negeri Padang

Abstract


Purpose- This study aims to reduce Non-Value Activities in the Health Service Process flow using Lean Six Sigma Approach in the Outpatient department of LubukBuaya Health Center.

Methodology - The research reported in this paper is based on a case study carried out using the lean six sigma DMAIC (Define-Measure-Analyze-Control) approach and its application in to reducing non-value activities in the health service process flowin the outpatient department of LubukBuaya health center in Padang. The analytical tools used in this study include value stream mapping, process capability, and fishbone diagram.

Finding - From the results of the analysis and research that has been done it turns out thatThe lead time needed in the flow of the outpatient service process is 82.74 minuteswith percentage of process cycle efficiency is 15,03%, it means that the service process to the outpatients is not yet efficient. It is caused by several factors such as there is no online registration application, the number of visits increases at certain hours, and use of the patient's electronic database that is not optimal.

 

Keywords:     Reduce, Non-Value Activities,  Lean six sigma, DMAIC, Health service, Outpatient.


Full Text:

PDF

References


Arnheiter, E. D., & Maleyeff, J. (2005). The integration of lean management and Six Sigma. The TQM Magazine, 17(1), 5–18. https://doi.org/10.1108/09544780510573020

Aulia, D., Thabrani, G., Padang, U. N., Padang, U. N., & Padang, U. N. (2018). Mengukur kepuasan pasien rsi siti rahmah padang atas kualitas pelayanan instalasi farmasi dengan metode IPA. Ranah Rasearch, 1(1), 18–27.

Doggett, A. M. (2005). Root Cause Analysis: A Framework for Tool Selection. Quality Management Journal, 12(4), 34–45. https://doi.org/10.1080/10686967.2005.11919269

Furterer, S., & Elshennawy, A. K. (2005). Implementation of TQM and Lean Six Sigma tools in local government: A framework and a case study. Total Quality Management and Business Excellence, 16(10), 1179–1191. https://doi.org/10.1080/14783360500236379

Furterer, S. L. (2009). Lean Six Sigma in Service: Applications and Case Studies. Boca Raton: CRS Press Taylor & Francis Group.

Gaspersz, V. (2007). Lean Six Sigma for Manufacturing and Service Industries. Jakarta: Gramedia Pustaka Utama.

Gurumurthy, G. N. A. (2013). Leanness assessment: a literature review. International Journal of Operations & Production Management. https://doi.org/http://dx.doi.org/10.1108/MRR-09-2015-0216

Haryono, J. M. T. (2013). Pengurangan waste pada proses produksi botol X menggunakan metode lean sigma. Jurnal Rekayasa Dan Manajemen Sistem Industri, 1(1), 37–46.

Hidayat, N., Thabrani, G., Padang, U. N., Utara, P., Padang, K., Barat, S., … Deployment, Q. F. (2018). Perpustakaan Universitas Negeri Padang (Unp) Dengan Mengintegrasikan Libqual Dan Kano Ke Dalam QFD. Ranah Rasearch, 1(1).

Indonesia Corruption Watch. (2010). Laporan Tahunan Indonesia Corruption Watch. Jakarta.

Maleyeff, J. (2007). Improving Service Delivery in Government with Lean Six Sigma. IBM Center for The Business of Government, 1.

Muniyappa, M. (2014). Value Stream Mapping : A Lean Tool. The International Journal Of Business & Management, 2(4).

Nallusamy, Dinagaraj, K.Balakanan, & Satheesh, S. (2015). Sustainable Green Lean Manufacturing Practices in Small Scale Industries - a Case Study. International Journal of Applied Engineering Research, 10(62), 143–146. Retrieved from https://www.researchgate.net/profile/S_Nallusamy2/publication/283749171_Sustainable_green_lean_manufacturing_practices_in_small_scale_industries_-_A_case_study/links/56ac4e0708ae28588c5d1ba5/Sustainable-green-lean-manufacturing-practices-in-small-scale-in

Novitasari, D. A. (2015). Analisis Kapabilitas Proses Untuk Pengendalian. Jurnal EKBIS, 114(2), 722–727.

Thabrani, G., Irfan, M., & Mesta, H. A. (2019). Efficiency Analysis of Local Government Health Service in West Sumatra Province Using Data Envelopment Analysis ( DEA ). Advances in Economics, Business and Management Research, 65(Icebef 2018), 783–789.

Tiono, F. W. (2009). Analisa kapabilitas proses data kualitatif dan usulan perbaikan di industri sandal. Simposium Nasional RAPI VIII 2009, 1, 35–41.

Vouzas, F., Psychogios, A., & Tsironis, L. (2014). The Road Towards Lean Six Sigma: Sustainable Success Factors in Service Industry. Nang Yan Business Journal, 2(1), 31–38. https://doi.org/10.2478/nybj-2014-0023




DOI: http://dx.doi.org/10.24036/jkmw0278800