AUTOMATIC CHICKEN EGGS HATCHER USING DHT 22 SENSOR and DC MOTOR GEARBOX BASED ON ARDUINO

YUNALDI YUNALDI - Department of Physics, Universitas Negeri Padang, West Sumatra, Indonesia
- Yohandri - Department of Physics, Universitas Negeri Padang, West Sumatra, Indonesia

Abstract


The hatching machine is one of the technological developments in the field of animal husbandry in increasing livestock productivity. Hatching eggs using an incubator is much more effective than natural/conventional breeding. The incubator is an incubator that has controlled temperature and humidity. Instruments used in the manufacture of hatching machines include a DHT 22 sensor which is used as a controller of temperature and humidity values, incandescent lamps are used as a heat source from the hatching machine, ultrasonic mist maker acts as a steam mist generator, DC motor is used as an egg turning rack driver, motor driver L298N acts as a DC motor movement controller, and Arduino Uno as a microcontroller that regulates all system work. This research was conducted with the aim of producing a hatching machine that is more complex and efficient. Based on data analysis carried out from the accuracy and thoroughness. The measurement accuracy ranges from 99.64% to 100%, while the measurement accuracy ranges from 99.64% to 100%, with an average measurement error of 0.178572%.

Full Text:

PDF

References


Adha, Ozzy Prasetya, et al. 2015. Arduino Uno-Based Automatic Curtain Drive System. ISSN: 2654-8380. Medan: Harapan University Medan.

Tri Handoko, Agustinus Pamungkas.2017. Arduino uno Based Automatic Clothes Dryer. (Thesis). Sanata Dharma University.

Arifana, iril Mare. 2016. Design and build a switching power supply with controlled current and voltage as a metal electropleting process power supply. [Thesis]. Malang State Islamic University.

Agata, Yayang Shegara Sukma Tri and Endryansyah. (2018). Design and Build a Temperature and Humidity Controller for a Chicken Egg Incubator Using Arduino Uno and Labview. Department of Electrical Engineering, Volume 07 Number 01 of 2018.

Aswad, Hajratul. 20014. Design of Temperature Control Tests for Hatching Poultry Eggs Using Dimmer Lamps. (Thesis). Alauddin State Islamic University.

Aziz, Faishol and Bambang Suprianto. 2019.Design of a Humidity Control System in an Aeroponic Planting System Using a Pid Controller. Journal of Electrical Engineering. Volume 08 Number 03 of 2019. Surabaya: State University of Surabaya.

Prasojo, Satriyo and Bambang Suprianto, 2019. Design of a Temperature Control System for a Baby Incubator Based on a Fuzzy Logic Controller. Journal of Electrical Engineering Volume 08 Number 01 of 2019. Surabaya: State University of Surabaya.

Rahman, Fathur, et al. 2015. Design of Ats/Amf as an Automatic Power Supply Switcher Based on Programmable Logic Control. Dielectric ISSN 2086-9487 Vol. 2, No. 2.2015.

Siregar, Samuel and Muhammad Rivai. 2018. Monitoring and Control of Water Spraying Systems for Aeroponics Cultivation Using NodeMCU ESP8266. Its Technical Journal Vol. 7, No. 2, (2018). Surabaya: Sepuluh Nopember Institute of Technology (Its).

Supriyono, Didi. 2014. Design and Design of Air Temperature and Humidity Controller for Chicken Egg Incubator Based on Arduino Mega 2560 Equipped with Ups. Muhammadiyah Surakarta university.

Suriansyah, Bambang. 2014. Backup power supply with a capacity of 100 ah / 12 v For industrial automation laboratories polyban. INTEKNA Journal, Year XIV, No. 2.

Zain, et al. 2016. Design of Smoke Detection System in Library Room using MQ-2 Sensor and Lcd Display with Atmega32 Microcontroller. JOURNAL OF INFORMATION TECHNOLOGY & EDUCATION. ISSN:2086-4981 VOL. 9 NO. September 3, 2016.




DOI: http://dx.doi.org/10.24036/11632171074