Rancang Bangun Sistem Kendali Smart Home Berbasis Programmable Logic Controller

Hannifannisa Hannifannisa; Hastuti Hastuti

doi:10.24036/jtev.v6i2.109402

Rancang Bangun Sistem Kendali Smart Home Berbasis Programmable Logic Controller

Hannifannisa Hannifannisa⁽¹⁾, Hastuti Hastuti⁽²⁾,
(1) Universitas Negeri Padang

Indonesia
(2) Universitas Negeri Padang

Indonesia

Corresponding Author

DOI : https://doi.org/10.24036/jtev.v6i2.109402

Full Text:

Language : en

Abstract

Smart Home (Smart Home) can change our lives as if to be smarter because it becomes a symbol where the owner can work automatically. By using a Programmable Logic Controller (PLC) the load at home can be controlled. The PLC used is PLC Outseal Shield V.3. Installed loads consist of: lights and fences. This electronic device controlled by PLC is more efficient in electrical power, cost-effective, convenient, safe, and easy to set up. This PLC uses ladder diagrams as a programming language. This final project uses several other components that are connected to a sensor consisting of an LDR sensor, a PIR sensor, and an infrared sensor. The PIR sensor is capable of detecting up to a range of 6 meters and the infrared sensor is capable of detecting a distance of 3-80 cm with a detection angle <15˚. This final project also uses a dc motor as a driving device to open and close fences

Keywords

Sensor LDR, Sensor PIR, Sensor Inframerah, PLC Outseal Shield V.3, Motor DC

References

E. Triawati and F. Aritonang, “Perancangan Smart Home Berbasis Programmable Logic Controller,” pp. 1–7, 2012.

M. Royhan, “Smart Home Berbasisi Programmable Logic Controller ( PLC ),” vol. IX, no. 17, pp. 19–25, 2018.

Utomo Joko, “Rancang Bangun Pengendali Dan Monitoring Motor Dc Menggunakan Komputer Berbasis Mikrokontroller,” p. 57, 2016.

F. Masykur and F. Prasetiyowati, “Aplikasi Rumah Pintar (Smart Home) Pengendali Peralatan Elektronik Rumah Tangga Berbasis Web,” J. Teknol. Inf. dan Ilmu Komput., vol. 3, no. 1, p. 51, 2016.

A. Ferdiansyah, I. B. A. Swamardika, and I. G. A. P. R. Agung, “Otomatis Berbasis Pemrograman Ladder Plc ( Programmable Logic Controller ) Zelio,” Maj. Ilm. Teknol. Elektro, vol. 15, no. 2, 2016.

D. T. P. Yanto, R. Hidayat, and H. Hamdani, “Rancang Bangun Trainer Elektronika Daya : Controlled and Uncontolled Rectifier,” Pros. Semin. Nas. Has. Penelit. 2018 Politek. Ujung Pandang, vol. 2018, pp. 83–88, 2018.

R. Herlina, “Sistem Pemantau Ruang Jarak Jauh Menggunakan Sensor PIR ( Passive Infrared ) Berbasis Atmega 8535,” 2017.

S. Primadewi Riyani, Darpono Rony, “Simulasi Sistem Kontrol Buka Tutup Pintu Gerbang Berbasis Plc Pada Trainer Sebagai Media Pembelajaran Di Politeknik Harapan Bersama,” J. Power Elektron. J. Orang Elektro, vol. 6, no. 2, p. 7, 2017.

A. Bakhtiar, “Panduan Dasar Outseal Plc,” p. 91, 2019.

SRI SUPATMI, “Pengaruh Sensor Ldr Terhadap Pengontrolan Lampu,” Maj. Ilm. UNIKOM, vol. 8, no. 2, pp. 175–180, 2010.